INSTRUCTIONS

• Remove the Safety Key.
  (Figure 1)
  
  
• Disconnect the Cable to the Handlebar.
  (Figure 2)
  
  
• Spray a small amount of WD-40® or similar lubricant on a paper towel or rag.
  
  
• Clean both sides all along the Top Face of the Orange Slide Bar.
  (Figure 3)
  
  
• Push the Start Slide to the left and compress the Orange Slide Bar up into the top of the handle as if starting the mower.
  

• Clean both sides of the Sidewalls on the Orange Slide Bar.
  (Figure 3)
  
  
• Operate the Orange Slide Bar several times to insure that it is moving freely and properly returning to the off position.